Coronavirus Response

Altapure Kills 100% of Coronaviruses In A Room That Kill People.

home-covid-hero-2

The UV Light Scam

Coronavirus Persistence

N95 & PPE Disinfection

Competitor Analysis

Why Altapure Kills 100% of Coronavirus, SARS-CoV-2 (COVID-19)

Medical grade cold sterilant delivers 100% Kill of Coronavirus, SARS-CoV-2 (COVID-19).

No remaining virus particles to spread post treatment.

Total, gas-like 3-D room coverage

Advantage of liquid-to-surface contact vs. gas & vapor systems.

Not impacted by temperature, humidity, distance, or light shadowing.

Unlike other products, Altapure generates a gas-like aerosol from an EPA registered “Cold Sterilant” that is certified as a “Sporicide” the hardest EPA claim to attain and the highest performance level for killing pathogens – including viruses.

Altapure has proven for years that its sub-micron aerosol can deliver a 100% sporicidal kill and no growth, on exposed surfaces in the entire treated room. If a deployed liquid is a proven EPA approved spore killing “Cold Sterilant”, then much weaker pathogens, like viruses, will also be neutralized.

Why Altapure Is The Best In The Industry

  • 100% kill and no growth for: bacteria, spores, fungus, and viruses (including Coronavirus, SARS-CoV-2 (COVID-19).
  • Sub-micron (0.68 micron) aerosol is gas-like and will treat all exposed room surfaces.
  • Gas-like aerosol application will not wet the room unlike typical “foggers”.
  • Extremely light chemical concentration (1.06 % active ingredients).
  • Fastest cycle time entry to exit.
  • Green process – aerosol rapidly breaks down into oxygen, water, and vinegar.
  • No toxic heavy metal containing aerosols that contain silver.
  • No surface wiping needed after treatment.
  • Immediate entry post treatment - no worries about vapor removal times.
  • Unlike other products like UV light, there is no shadowing and no remaining active pathogens.
  • Easy to use remote tablet control allows crews to attend to other room work.
  • Integrated air filtration system for AP-4.
  • Remote controlled via tablet.

Altapure's AP-4 ™ High-level Disinfection System (HLDS ™)

The AP-4 HLDS ™ is designed for large spaces such as: Operating Rooms, Patient Care Rooms, ICU’s, NICU’s, Burn Units, Employee Break Rooms, Changing Rooms, Laundry Processing Areas.

  • 100% Kill of Coronavirus, SARS-CoV-2 (COVID-19).
  • No remaining virus particles to spread.
  • Easy to transport.
  • Integrated air filtration system.
  • Total gas-like 3-D space coverage.
  • Advantage of liquid to surface contact vs. vapor & gas systems.
  • Residue-free process.
  • 100% kill and no growth for: bacteria, spores, fungus, and viruses.
AP-4.02-Edit-med4
Altapure PC-1 Unit

Altapure's PC-1 ™ High-level Disinfection System

The PC-1 ™ offers the same performance as the AP-4 ™, but is designed for smaller spaces such as: Ambulances, First Responder Vehicles, Home Use, School Buses, Small Clinic Spaces.

  • 100% Kill of Coronavirus, SARS-CoV-2 (COVID-19).
  • No remaining virus particles to spread.
  • Compact Size.
  • Lightweight.
  • Easy to transport.
  • Remotely located Air Processor System (accessory).
  • Total gas-like 3-D space coverage.
  • Advantage of liquid to surface contact vs. vapor & gas systems.
  • Residue-free process.
  • 100% kill and no growth for: bacteria, spores, fungus, and viruses.

Multipurpose High-Level Disinfection Cabinet (MPDC-1 ™)

The multipurpose disinfection cabinet (MPDC-1 ™) is entering the FDA 510-K approval process. This product was successfully challenged by an independent laboratory. As a result, there was a 100% kill for VRE, CRE, MRSA, C. difficile, and C. auris, obtained in a twenty-three (23) minute process cycle, without any detected residue post cycle.

  • 100% Kill of Coronavirus, SARS-CoV-2 (COVID-19).
  • No remaining virus particles to later spread.
  • Compact Cabinet System.
  • Easy to transport.
  • Total gas-like 3-D space coverage.
  • Advantage of liquid to surface contact vs. vapor & gas systems.
  • Residue-free process.
  • 100% kill and no growth for: bacteria, spores, fungus, and viruses.

A remarkable Log 8.4 log kill of the C. auris fungal pathogen was also obtained in only a fifteen (15) process cycle, with a cycle cost of only twenty cents ($ 0.20 USD). The MPDC-1 ™ cabinet can high-level disinfect one or more, ultrasonic imaging devices and probes, and/or other non-lumen devices, in the same treatment cycle.

This high-level disinfection cabinet also recently proved in a peer reviewed independent study, that it meets the criteria for disinfection and decontamination of N95 masks, achieving >6-log 10 reductions on N-95 respirator filter material with a 31-minute process cycle, for:

  • Bacteriophage MS2 (coronavirus surrogate)
  • Methicillin-resistant Staphylococcus aureus (MRSA)
  • difficile spores

The MPDC-1 ™ showed it can effectively kill coronaviruses like SARS-CoV-2 (COVID-19) and meet the EPA definition for disinfection of surfaces contaminated with this virus as well as MRSA and C. difficile spores.

HLDC-1-cabinet-sm2

Altapure’s 100% Kill, High-Level Disinfection Systems:

Altapure’s AP-4 ™, PC-1 ™, and MPDC-1 ™ products, are all engineered to ELIMINATE Coronavirus, SARS-CoV-2 (COVID-19) as well as other pathogenic super bugs that are still present in the health care environment (ie: C. difficile spores, VRE, CRE, MRSA, C. auris).

Biological Process Validation

Immediate performance feedback prevents infection and death.

Altapure’s process uses medical grade spore strip challenges that can be located in the treated areas to validate the treatment to ISO Standards.  After incubation, and compared to control(s), these strips will provide a visual indication that the treatment process was effective.